(844) 533-7230
Welcome to LEDRADIANT, your LED lighting source

Shopping Cart - 0 Item

You have no items in your shopping cart.

 

  • Temporary Work Light 150W 18750Lm 5000K IP64 ETL Remote Control
  • Temp work Light Linkable 60W 7500Lm 5000K IP64 ETL Remote Control
  • Temp work Light Linkable 10 Ft 60W 7500Lm 5000K IP64 ETL Remote Control
  • Temp work Light tunnel 60W 7500Lm 5000K IP64 ETL Remote Control

Temporary Work Light 150W 18750Lm 5000K IP64 ETL Remote Control

Availability: In stock


This portable and linkable temporary work light delivers 18750 lumens with only 150W LED Corn Bulb that equals up to a 600 Watts metal halide Bulb. Remote control. Good to be used for heights between 12 to 35 Ft. The bulb is IP64, built with fire retardant plastics and easy to clean. Not to be used under open rain but is good for wet locations.

Click here to see other Corn Bulb Lights.

Availability: In stock

Regular Price: $182.00

Special Price $155.00

  • Buy 10 for $147.25 each and save 5%
  • Buy 25 for $142.60 each and save 8%
  • Buy 50 for $139.50 each and save 10%
  • Buy 100 for $136.40 each and save 12%



Replace halogen, metal halide, incandescent or HPS with LED corn bulbs
LED corn bulbs will be equivalent twice the power of CFLs, 10 times incandescent and 5 times Metal Halide or HPS
Compact Fluorescent Metal Halide or HPS LED Corn Bulb
50W100W 20 Watts
80W150W 30 Watts
100W175W 40 Watts
125W250W 50 Watts
175W300W 60 Watts
200W400W 100 Watts
250W600W 120 Watts
 750W 150 Watts
No
PROGRAMMING INSTRUCTIONS
LED WORK LIGHTS

REMOTE CONTROLLED WORK LIGHTS

Important note: verify that power voltage does not exceeds 277VAC.
Flashing bulb indicates that the Protection Circuit triggered: Disconnect inmediately, check voltage and wiring! otherwise the LED Corn Cob Bulb will be ruined and the warranty voided.
Each lamp is paired at factory to buttion #1 of the remote controll unit. Clear pairing is necessary before programming.
1-Turn off AC power for more than 10 seconds, then power on the lamp.
2-Click 3 times within 3 secconds any other button but the one the lamp was paired to, the LED should flash 6 times to indicate that the lamp has been successfuly cleared.  

1. Turn off the power for more than 10 seconds.
2. Turn on power to the lamp.
3. Press 3 times within 3 seconds the remote control button you want to assign to the lamp.
4. LED indicator will flash 3 times to indicate successful pairing.
5. Now the lamp can be turned on or off by pressing the paired button. Each button can only control one lamp.
6. Use the ON or OFF buttons to turn on or off the grouped lamps.
7. A maximum of 6 lamps can be controlled with one remote.

Save the environment, your children and the planet
615 North 21st Ave., Hollywood, FL 33020 – (844).533.7230
[email protected] www.ledradiant.com

5 YEAR WARRANTY POLICY
For Commercial LED Lamps and fixtures


This document sets forth the warranty policy of the LEDRadiant organization (‘LEDRadiant’) from which you (‘Purchaser’) purchase your commercial LED Lamps .

This policy is applicable only to LEDRadiant (‘Products’) described in the Warranty Certificate extended to the Purchaser along with the correlated invoice or the Certificate in the website page for the product being questioned.

This warranty policy is subject to the provisions as set forth herein and is subject to the terms and conditions as attached to this document (‘Warranty Terms and Conditions’) .

This warranty policy only applies if referred to in a sales agreement between LEDRadiant and the Purchaser and it will replace the standard warranty clause provided in the LEDRadiant general terms and conditions of sale.

Warranty period
5 Year. The warranty period starts on the date the products are delivered.
By default, purchaser receives above mentioned ‘standard warranty’.

On request, an ‘extended warranty’ or ‘customized project warranty’ can be agreed upon after evaluation of the specific application conditions. Extended warranty cost will be calculated and applied to the order.

Purchaser shall not rely upon any other information or documentation.

Within the warranty period, LEDRadiant will replace any defective bulb or fixture with equal or updated working model in the same conditions or better.

Summary Warranty Terms and Conditions (non-exhaustive)

This warranty policy is valid only for products sold in The United States of America.
Products have been purchased directly from a LEDRadiant (sales) organization.
Proof of purchase is available for inspection by LEDRadiant.
Products have been properly installed and operated in accordance with the manufacturer’s instructions.
• More than 10% of the LED chips are not properly working.
A LEDRadiant representative will have access to the defective Products.
If the Products or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting systems.
Shipping and Labor costs for installation of the Products are not covered under this warranty.

This warranty is valid for order number:




By LEDRadiant

Save the environment, your children and the planet
615 N 21st Ave., Hollywood, FL 33020 – (844).533.7230
[email protected] www.ledradiant.com

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Description



Replace halogen, metal halide, incandescent or HPS with LED corn bulbs
LED corn bulbs will be equivalent twice the power of CFLs, 10 times incandescent and 5 times Metal Halide or HPS
Compact Fluorescent Metal Halide or HPS LED Corn Bulb
50W100W 20 Watts
80W150W 30 Watts
100W175W 40 Watts
125W250W 50 Watts
175W300W 60 Watts
200W400W 100 Watts
250W600W 120 Watts
 750W 150 Watts
Additional Information
No
PROGRAMMING INSTRUCTIONS
LED WORK LIGHTS

REMOTE CONTROLLED WORK LIGHTS

Important note: verify that power voltage does not exceeds 277VAC.
Flashing bulb indicates that the Protection Circuit triggered: Disconnect inmediately, check voltage and wiring! otherwise the LED Corn Cob Bulb will be ruined and the warranty voided.
Each lamp is paired at factory to buttion #1 of the remote controll unit. Clear pairing is necessary before programming.
1-Turn off AC power for more than 10 seconds, then power on the lamp.
2-Click 3 times within 3 secconds any other button but the one the lamp was paired to, the LED should flash 6 times to indicate that the lamp has been successfuly cleared.  

1. Turn off the power for more than 10 seconds.
2. Turn on power to the lamp.
3. Press 3 times within 3 seconds the remote control button you want to assign to the lamp.
4. LED indicator will flash 3 times to indicate successful pairing.
5. Now the lamp can be turned on or off by pressing the paired button. Each button can only control one lamp.
6. Use the ON or OFF buttons to turn on or off the grouped lamps.
7. A maximum of 6 lamps can be controlled with one remote.

Save the environment, your children and the planet
615 North 21st Ave., Hollywood, FL 33020 – (844).533.7230
[email protected] www.ledradiant.com

5 YEAR WARRANTY POLICY
For Commercial LED Lamps and fixtures


This document sets forth the warranty policy of the LEDRadiant organization (‘LEDRadiant’) from which you (‘Purchaser’) purchase your commercial LED Lamps .

This policy is applicable only to LEDRadiant (‘Products’) described in the Warranty Certificate extended to the Purchaser along with the correlated invoice or the Certificate in the website page for the product being questioned.

This warranty policy is subject to the provisions as set forth herein and is subject to the terms and conditions as attached to this document (‘Warranty Terms and Conditions’) .

This warranty policy only applies if referred to in a sales agreement between LEDRadiant and the Purchaser and it will replace the standard warranty clause provided in the LEDRadiant general terms and conditions of sale.

Warranty period
5 Year. The warranty period starts on the date the products are delivered.
By default, purchaser receives above mentioned ‘standard warranty’.

On request, an ‘extended warranty’ or ‘customized project warranty’ can be agreed upon after evaluation of the specific application conditions. Extended warranty cost will be calculated and applied to the order.

Purchaser shall not rely upon any other information or documentation.

Within the warranty period, LEDRadiant will replace any defective bulb or fixture with equal or updated working model in the same conditions or better.

Summary Warranty Terms and Conditions (non-exhaustive)

This warranty policy is valid only for products sold in The United States of America.
Products have been purchased directly from a LEDRadiant (sales) organization.
Proof of purchase is available for inspection by LEDRadiant.
Products have been properly installed and operated in accordance with the manufacturer’s instructions.
• More than 10% of the LED chips are not properly working.
A LEDRadiant representative will have access to the defective Products.
If the Products or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting systems.
Shipping and Labor costs for installation of the Products are not covered under this warranty.

This warranty is valid for order number:




By LEDRadiant

Save the environment, your children and the planet
615 N 21st Ave., Hollywood, FL 33020 – (844).533.7230
[email protected] www.ledradiant.com
Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

FAQ

Site Seals

Advaith Starts
Advaith Ends