Shopping Cart - 0 Item
You have no items in your shopping cart.
Accessories
-
Rope Light Plastic Clip 10mm to 12.5mm
Regular Price: $0.30
Special Price $0.10
1/2" Holding clip for LED Rope Clip ZZS line
. Conveniently install any of our ZZS ropes, IP67, with these plastic clips that will be easy to install with two screws and will firmly hold the rope in any position. Learn More -
Rope Light Clip 10mm to 12.5mm
Regular Price: $0.30
Special Price $0.25
1/2" Holding pin for LED Rope Clip ZZS line. Conveniently install any of our ZZS ropes, IP67, with these metal clips that will be easy to install with one screw and will firmly hold the rope in any position.
Learn More -
End cap for ZZS-VTN-08007-32
Regular Price: $1.00
Special Price $0.45
End cap for ZZS-VTN-08007-32
Learn More -
Connection Pin for single color rope light (ZZS-VTN-08007-32)
Regular Price: $1.00
Special Price $0.85
Connection Pin for single color rope light (ZZS-VTN-08007-32).
Learn More -
Connection Pin for multi color rope light (ZZS-RGB-08007-MC)
Regular Price: $1.00
Special Price $0.85
Connection Pin for multi color rope light (ZZS-VTN-08007-MC).
Learn More -
Double connector for multi color rope light (ZZS-VTN-08007-MC)
Regular Price: $1.00
Special Price $0.85
Connection Pin for multi color rope light (ZZS-VTN-08007-MC).
Learn More -
Connector for single color rope light (ZZS-VTN-08007-32)
Regular Price: $2.00
Special Price $1.25
Connector for single color rope light (ZZS-VTN-08007-32).
Learn More -
LED Flood Light Arm Connector for FUW
Connector Arm for Flood Light FUW
. Needed to use slipfitter, direct arm, universal arm. Learn More -
Inside L connector from tube to tube for ZZS-VTN-08007-32
Regular Price: $5.00
Special Price $4.15
Inside L connector from tube to tube for ZZS-VTN-08007-32
Learn More -
110 AC input Power converter for single color rope ZZS-VTN-08007-32
Regular Price: $6.00
Special Price $5.25
110 AC input Power converter, drive 82 ft / pc for ZZS-VTN-08007-32.
Learn More -
Wired driver for multi color rope light (ZZS-RGB-08007-MC)
Regular Price: $10.00
Special Price $8.25
Remote control with driver for multi color rope light RGB (ZZS-VTN-08007-MC)
. The driver and remote control communicate in visual range via infrared. Learn More -
Automatic Security Photo Sensor - Max 600W
Operating voltage: AC 110V-130V, Infrared detection controller, adopt infrared detection way to control load switch, Detection distance: 12m ;Detection range: 180*140 degree(adjustable), The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 8 seconds to 7 minutes after motion has ceased. Learn More -
LED Flood Light Trunnion Mount for FUW-TWC series 35W-60W
LED Flood Light Trunnion Mount for FUW-TWC series 35W-60W
This arm can be used for mounting directly to a wall, wood pole or square pole. Learn More -
PHOTOCELL push & twist series 100-277V UL
This Photocell is for use with street lights, barn lights, dusk to down and any other fixture with the base for push and twist that operates 100-277VAC.
Learn More -
Voltage surge protector for LED products 5Kv Max 10Kv
Regular Price: $15.00
Special Price $12.00
This surge protector device is for use with any LED or electronic product. Learn More -
Voltage surge protector for LED products 5Kv Max 10Kv for L/N L/G and N/G
Regular Price: $15.00
Special Price $12.50
This surge protector provides single phase protection for line/neutral, line/ground and neutral/ground in accordance with IEEE C62.41 Category C Low Exposure. The unit was designed to meet new design requirements for luminaires using LED light engines. It offers protection for LED luminaires in a small and convenient flat form factor. The surge protector is Type 5 SPD. Also protects Electronic Fluorescent & HID ballasts as well as all other electronic products. Learn More -
Mogul to Mogul Extender
Mogul Base Porcelain Socket Extenders are intended for use in an existing mogul base socket where the light bulb socket needs to be extended to accept your desired light bulb or for aesthetic reasons TransformsLight E39 E40 To E39 E40 Lamp Bulb Socket High temperature resistant, anti-burning PBT and anti-aging Practical and durable, easy to install Learn More -
LED Flood Light Mounting Slipfitter for FUW
Slipfitter mount for Flood Light FUW
. Good to be used to mount with 2 3/8" tennons. Learn More -
LED Flood Light Mounting Direct Arm for FUW
Direct mount for Flood Light FUW
. Good to be used to mount direct on square poles. Learn More -
LED Flood Light Universal Mounting Arm for FUW
Universal mount for Flood Light FUW
. Good to be used to mount direct on square poles, wood poles, walls. Learn More -
LED Flood Light Photocell Assembly for FUW
Photocell Assembly for Flood Light FUW
. Needed to use push and twist photocell.; Learn More -
Shoebox Photocell for SFW Series
This light-controlled switch seamlessly integrates with standard NEMA receptacles for effortless energy-saving automation. Perfect for streetlights, area lighting, and parking lots, it operates within a wide temperature range and is sealed with an IP66 rating for durability. With power-off and power-on features based on light levels, it offers reliable performance in various environments. Contact us now to learn more about our Street Lights Daylight Sensor Photocell and take advantage of our special offers. Illuminate the streets intelligently with our advanced lighting solutions!
Learn More -
Slip Fitter Arm for SFW Series White
Enhance your outdoor lighting setup with our Cast Aluminum Mast Arm Adapter. Designed to securely attach fixture heads to 2-inch horizontal steel tenon arms, this adapter ensures stability and durability. Its white slip fitter design complements SFW series fixtures, offering easy installation and a sleek look. Improve your outdoor illumination today with this reliable solution.
Learn More -
Arm Mount for SFW Series White
Introducing the Arm Mount for SFW Series White. Designed to effortlessly attach to 4" and 5" square and round poles, this versatile mount is perfect for new installations or retrofits. Its simple installation and durable construction make it an ideal choice for reliable outdoor lighting solutions.
Learn More -
Direct Mount Arm for SFW Series Dark Bronze
Introducing the Direct Mount for SFW Series in Dark Bronze, simplifying the installation of lighting fixtures on 4" and 5" poles. Its versatile design seamlessly integrates with existing poles, ensuring a reliable solution for both new setups and retrofits.
Learn More -
Shoebox Photocell Receptacle for SFW Series
Elevate your LED shoebox lighting system with the 5 Pin Photocell Mount Receptacle, designed for seamless integration and enhanced performance. This innovative accessory ensures reliable dusk-to-dawn automation, optimizing energy efficiency and visibility in outdoor environments. Upgrade your lighting control system effortlessly and experience the benefits of intelligent illumination. Contact us now to learn more about our Street Lights Daylight Sensor Photocell and take advantage of our special offers. Illuminate the streets intelligently with our advanced lighting solutions!
Learn More -
Protection Single phase Type 4CA SPD for L/N L/G and N/G
Regular Price: $18.00
Special Price $14.60
Designed to be used in conjunction with LED Drivers and fixtures to provide an additional level of protection against powerline disturbances in industrial, commercial and residential applications where surge protection to IEEE C62.41.2 is required. It can Also protect Electronic Fluorescent & HID ballasts as well as all other electronic products. This product provides single phase protection for line/neutral, line/ground and neutral/ground and is a Type 4CA SPD for field or factory installation. Learn More -
U-Bracket for SEE Street Light Series
Regular Price: $19.00
Special Price $15.85
This U-bracket with swivel can be used in square or round poles, wall, etc.. Angle it as necessary. Learn More -
Street Light Wall, Wooden Pole Trunnion Mount for SET series
Trunion mount arm for SET series
This arm can be used for mounting directly to a wall or square pole.
Learn More -
-
-
Swivel mount Photo Sensor - Max 1800W
Operating voltage: AC 110V-130V, Infrared detection controller, adopt infrared detection way to control load switch, Detection distance: 12m ;Detection range: 180*140 degree(adjustable), The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 8 seconds to 7 minutes after motion has ceased. Learn More -
Mounting: Arm for Square or Round pole for STC series
This ARM fits our STC light heads for street or parking lot lighting. Good to be used in either square or round poles.The round pole adapter part can be easily removed then the arm can be used in square poles. Installation is very easy. Learn More -
Trunion Mount for STX Street Lights
Enhance the versatility of your STX Street Lights with our commercial Trunion Mount. Designed specifically for the STX series, this Trunion Mount provides a secure and adjustable mounting option for your lights. With easy installation and flexible positioning, you can achieve optimal lighting angles and coverage for your commercial spaces. Upgrade your lighting system with our Trunion Mount and enjoy the convenience of versatile and customizable lighting solutions. Click below to explore our Trunion Mount and take your STX Street Lights to the next level. Illuminate your spaces with precision and efficiency.
Learn More -
Motion Sensor for Warehouse Lighting U8B series
Occupancy sensor with 100%/0% (by default) function, programmable with remote control.
This motion detection sensor is to be added to UFO fixture. UFO will stay at 10% until motion is detected when it will turn to 100% and will turn back to 10% or as programmed after the last motion was detected. Ships with 5 seconds 100% hold time. Products prepared for this device that are purchased without it will be shipped with an empty cover. The motion sensor cover includes a humanoid icon while the empty ones are blank. Learn More -
Motion Sensor with photocontrol bi-level programmable
Occupancy sensor with 100%/10% (by default) function, programmable with remote control.
This motion detection sensors can be added to UFO fixture, street light or high bay. fixture will stay at 10% until motion is detected when it will turn to 100% and will turn back to 10% or as programmed after the last motion was detected. Ships with 5 seconds 100% hold time. Motion sensor plugs into products specially designed to accept it. Works on 12VDC supplied internally by the product where it is installed. Push and screw in and and is ready to operate. Learn More -
Remote Control for Microwave Motion Sensor Full Function
Regular Price: $23.00
Special Price $19.85
This Remote control allows the programming of Microwave Motion sensor with on/off, Daylight and dimming functions. Select with up/down arrows the spec you want to adjust. Use the left/right arrow to select the value and press OK to save. Press DISP to display the current settings for the remote. See additional information for complete instructions. Enhance convenience and efficiency with our advanced Remote Control for Microwave Motion Sensor. This cutting-edge device provides full functionality, allowing you to effortlessly control your microwave motion sensor from a distance. Easily adjust settings, sensitivity, and detection range with just a few clicks. Enjoy the convenience of remote operation. Improve security, save energy, and streamline operations with our versatile Remote Control for Microwave Motion Sensor.
Learn More -
LED Flood Light Trunnion Mount for FUW-TWC series 100W-450W
LED Flood Light Trunnion Mount for FUW-TWC series 100W-450W
This arm can be used for mounting directly to a wall, wood pole or square pole. Learn More -
LED Flood Light Mounting Yoke for FUW
Trunion mount for Flood Light FUW
. Good to be used to mount on walls, wooden poles, on the roof. Learn More -
Trunnion Mount for SFW Series White
Introducing the Trunnion Mount for SFW Series White. Easily install your lighting fixtures directly onto walls with 1/2" conduit wiring. Simplify your setup with this hassle-free solution for secure mounting.
Learn More
Site Seals
About us
Information
- Call us for a free consultation.
Our local specialist will create a free S-ROI report. - Find a Qualified Electrical Contractor
- Reviews and Projects
- Accessibility for All
Warehouses
- Bell Gardens, CA
- Gardena, CA
- Los Angeles, CA
- Rancho Dominguez, CA
- Baldwin Park, CA
- City of Industry, CA
- Riverside, CA,
- Temecula, CA
- Hollywood, FL
- Acworth, GA
- Buford, GA
- Duluth, GA
- Medford, NY
- Plainview, NY
- Ronkonkoma, NY
- Columbus, OH
- Dallas, TX
- Houston, TX
- Mckinney, TX
- Stafford, TX
CONTACT US
- Ph: (844) 533-7230
- Fax: (305) 901-1314
- 615 N 21st Avenue
Hollywood, FL 33020
Testimonials
Eddy,
Thank you very much for enhancing illumination for my facilities, saving money in the future with a small investment today
..... Continue reading..
I have replaced 32 Watt tubes with ledradiant 18 Watt in the office and 175 Watt high bay with 54 Watt solid state lamps. I was skeptical, but my electric bill is 35% down.
I would like to commend Mr. Guillermo Pecyner and the LED Radiant crew, for their professionalism and knowledge in the transition of our lightning service...
LedRadiant is a world class company that treats their customers with respect. The expertise and attention to detail from LedRadiant really made my LED retrofit project go seamless.
Excellent service and product. The fluorescent lights in the restaurants have been changed to LED tubes, there were a total 225 none had problems, the ballast have been removed and now the lighting is double. Great attention from the owner, highly recomme
Great service and a great LED light selection......what a change these LED lights gave to my office
Love LEDRadiant's products! Eddy and James are very knowledgeable and helpful. Great prices and great products. Will buy more for the exterior. Love my new interior lighting! Second photo shows the difference the new LED lights make on the outside!!
Eddy is a gent, working with him has been a pleasure. Eddy really knowledgable about LEDs he helped me with all the different acronyms and technicals to help me with my project. I couldnt be happier with the results. Thank you Eddy and Team!
