You have no items in your shopping cart.
Revolutionize commercial lighting with our Slim LED Wall Pack designed to meet the needs of electricians and electrical contractors. Engineered for durability and versatility, this wall pack offers unparalleled performance in various applications.
Crafted from heavy die-cast aluminum alloy with a bronze powder-coated finish, ensuring robustness and longevity. Compatible with 120-277V input, operating efficiently in temperatures ranging from -20°C to 45°C.
Equipped with high brightness luminleds 2835 chips and glass optics, delivering uniform illumination with a wide 120° beam angle. Features a slim design for a discreet appearance on buildings, facilitating effortless wall mounting with a backside plate for seamless installation.
Built-in CCT&Power tunable Switch and Photocell options provide flexibility and customization according to specific lighting requirements. Additionally, enjoy the convenience of 0-10V dimming for enhanced control over lighting levels.
Our Slim LED Wall Pack offers electricians and electrical contractors a reliable and efficient lighting solution for various commercial applications. With its durable construction, customizable features, and easy installation, it's the ideal choice for illuminating warehouses, stadiums, factories, parking lots, supermarkets, shopping malls, logistic centers, and auto dealerships, ensuring optimal visibility and safety while maximizing energy efficiency.
We invite you to browse our selection and do not hesitate to chat with us or call us to 844-533-7230 for any question regarding our LED products.
No |
![]() MEDIUM WALL PACK INSTALLATION GUIDE
(WTM-TZP-70600-4Y/5Y)
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION 1. To avoid electric shock, disconnect power at source prior to installation. 1. Junction box Mounting 1. Loosen screws and remove the front lens set carefully from the back plate.
![]() 2. Drill appropriate knockouts (B) for wiring, the fixture supports standard 3 1/4' and 4" Junction box.
![]() 3. Attach the back plate on the wall use the supplied gaskets for a weather tight seal
![]() 4. Finish wiring (Black for Line, White for Neutral and Green/Yellow wire for Ground).
![]() 5. Replace the lens on the hinges, make connections and close the lens set then tighten the screws.
![]() 2. Conduit Mounting 1. Loosen screws and remove the front lens set carefully from the back plate.(See step 1 above)
2. Remove 1/2 'plug from where you intend to feed conduit ![]() 3. Drilling out the holes (C) to secure it on the wall with choosing proper screws.
4. Finish wiring (Black for line, White for neutral and Green/Yellow for ground). (See step 4 above) ![]() 5. Replace the lens on the hinges, make connections and close the lens set and tighten the screws to fasten the lens set to the back plate.
![]() Save the environment, your children and the planet
500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230
[email protected] – www.ledradiant.com ![]() 5 YEAR WARRANTY POLICY
For Commercial LED Lamps and fixtures
• This warranty policy is valid only for products sold in The United States of America.
• Products have been purchased directly from a LEDRadiant (sales) organization. • Proof of purchase is available for inspection by LEDRadiant. • Products have been properly installed and operated in accordance with the manufacturer’s instructions. • More than 10% of the LED chips are not properly working. • A LEDRadiant representative will have access to the defective Products. • If the Products or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting systems. • Shipping and Labor costs for installation of the Products are not covered under this warranty. This warranty is valid for order number: By LEDRadiant Save the environment, your children and the planet
500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230
[email protected] – www.ledradiant.com |
Rate |
---|
Rate |
---|
Rate |
---|
Rate |
---|
Revolutionize commercial lighting with our Slim LED Wall Pack designed to meet the needs of electricians and electrical contractors. Engineered for durability and versatility, this wall pack offers unparalleled performance in various applications.
Crafted from heavy die-cast aluminum alloy with a bronze powder-coated finish, ensuring robustness and longevity. Compatible with 120-277V input, operating efficiently in temperatures ranging from -20°C to 45°C.
Equipped with high brightness luminleds 2835 chips and glass optics, delivering uniform illumination with a wide 120° beam angle. Features a slim design for a discreet appearance on buildings, facilitating effortless wall mounting with a backside plate for seamless installation.
Built-in CCT&Power tunable Switch and Photocell options provide flexibility and customization according to specific lighting requirements. Additionally, enjoy the convenience of 0-10V dimming for enhanced control over lighting levels.
Our Slim LED Wall Pack offers electricians and electrical contractors a reliable and efficient lighting solution for various commercial applications. With its durable construction, customizable features, and easy installation, it's the ideal choice for illuminating warehouses, stadiums, factories, parking lots, supermarkets, shopping malls, logistic centers, and auto dealerships, ensuring optimal visibility and safety while maximizing energy efficiency.
We invite you to browse our selection and do not hesitate to chat with us or call us to 844-533-7230 for any question regarding our LED products.
No |
![]() MEDIUM WALL PACK INSTALLATION GUIDE
(WTM-TZP-70600-4Y/5Y)
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION 1. To avoid electric shock, disconnect power at source prior to installation. 1. Junction box Mounting 1. Loosen screws and remove the front lens set carefully from the back plate.
![]() 2. Drill appropriate knockouts (B) for wiring, the fixture supports standard 3 1/4' and 4" Junction box.
![]() 3. Attach the back plate on the wall use the supplied gaskets for a weather tight seal
![]() 4. Finish wiring (Black for Line, White for Neutral and Green/Yellow wire for Ground).
![]() 5. Replace the lens on the hinges, make connections and close the lens set then tighten the screws.
![]() 2. Conduit Mounting 1. Loosen screws and remove the front lens set carefully from the back plate.(See step 1 above)
2. Remove 1/2 'plug from where you intend to feed conduit ![]() 3. Drilling out the holes (C) to secure it on the wall with choosing proper screws.
4. Finish wiring (Black for line, White for neutral and Green/Yellow for ground). (See step 4 above) ![]() 5. Replace the lens on the hinges, make connections and close the lens set and tighten the screws to fasten the lens set to the back plate.
![]() Save the environment, your children and the planet
500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230
[email protected] – www.ledradiant.com ![]() 5 YEAR WARRANTY POLICY
For Commercial LED Lamps and fixtures
• This warranty policy is valid only for products sold in The United States of America.
• Products have been purchased directly from a LEDRadiant (sales) organization. • Proof of purchase is available for inspection by LEDRadiant. • Products have been properly installed and operated in accordance with the manufacturer’s instructions. • More than 10% of the LED chips are not properly working. • A LEDRadiant representative will have access to the defective Products. • If the Products or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting systems. • Shipping and Labor costs for installation of the Products are not covered under this warranty. This warranty is valid for order number: By LEDRadiant Save the environment, your children and the planet
500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230
[email protected] – www.ledradiant.com |
Rate |
---|
Rate |
---|
Rate |
---|
Rate |
---|