

    

    
                
                
            
                
                    SPECIFICATIONS:SKU: WTS-TBS-30300-6U
                
                
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                
            
            
        
        
        Equal up to a 125W HID bulbs
        
        
            
                
                    
                        
                        Electrical:
                        
                        
                            
                                Watts:30
                            
                            
                                Operating Voltage:90-277 VAC                                
                            
                            
                                Operating Temperature: -22° F to 122° F                                
                            
                            
                                Operating Humidity:10% to 100%RH                                
                            
                            
                                Power Factor (PF):>98%                                
                            
                            
                                Power Supply Efficiency:>98%
                            
                        
                    

                    
                        
                        Photometric:
                        
                        
                            
                                LED Luminous Flux (lm):3000                                
                            
                            
                                Luminous Efficiency:100                                
                            
                            
                                CRI (ra):>75                                
                            
                            
                                Color Temperature (Kelvin):5500 K                                
                            
                            
                                Lens type:Prismatic                                
                            
                            
                                Expected Life: 70,000 hrs.                                
                            
                            
                                L70:50,000 hrs.                                
                            
                            
                                Beam Angle:120º                                
                            
                        
                    

                    
                        
                        Mechanical:
                        
                        
                            
                                IP Rating:IP65                                
                            
                            
                                Connector:Wired                                
                            
                            
                                Base Type: Hardwired                                
                            
                            
                                Heat Radiator:Aluminum                                
                            
                            
                                Color:Brown (dark)                                
                            
                            
                                Product Size:13" x 9" x 7"                                
                            
                            
                              
                                Package Size:0'' x 0'' x 0''                                
                            
                            
                                Unit Gross Weight: 9.0000 Lb
                            
                        
                    

                    
                        
                        Certifications:
                        
                        
                            
                                Safety Compliance:UL
                            
                            
                                EMI/RFI compliance:FCC
                            
                            
                                Energy Efficiency/Performance:
                            
                            
                                Environmental:RhOS
                            
                        
                    
                
                
                
                    
                    
                
                
            
            
                
                
                
                
                
                
                
                
                
            
            
                
                    APPLICATIONS:
Back Alleys
Bridges
Building Fronts
                    And more
                

                
            
            
                
                615 N 21st Avenue, Hollywood, FL 33020, United States of America - Tel: +1 (844)533-7230                
                contact@ledradiant.com - www.ledradiant.com

LED Corn Bulbs to HID HPS MH Replacements

Customer Reviews

No problems, as expected Review by Carlos

Rate

I had no problem installing this light. It makes a dark doorway well lit up. Will buy this again later.

(Posted on 9/15/2015)

Amazed, very bright only 30 watts Review by Clint P

Rate

This light is very bright and works better than other lights I brought before. I have tried flood lights but not the same, this one beats them all . I received them in 3 days with a 5 year warranty certificate, easy to install and no need to repaint, as the footprint is the same as the 175 watts wall pack I had.

(Posted on 3/2/2015)

Owner Threads in Motion Review by MARK C

Rate

Ordered 2 times. Lights are Great

(Posted on 12/19/2014)

Write Your Own Review

You're reviewing: 30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

How do you rate this product? *

	1 star	2 stars	3 stars	4 stars	5 stars
Rate

*Nickname
*Summary of Your Review
Review Image 1
Review Image 2
Review Image 3
*Review

Shopping Cart - 0 Item

30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

Product Tags

Customer Reviews

Write Your Own Review

You're reviewing: 30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

How do you rate this product? *

Product Tags

Customer Reviews

Write Your Own Review

You're reviewing: 30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

How do you rate this product? *

Site Seals

About us

FORMS

Information

Warehouses

CONTACT US

ARE YOU A RESELLER? Click here and fill in the form

Testimonials

Find us on Facebook

Latest Tweets

LOCATION MAP

No
click here to download the PDF file. MEDIUM WALL PACK INSTALLATION GUIDE (WTM-TZP-70600-4Y/5Y) PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION 1. To avoid electric shock, disconnect power at source prior to installation. 2. The installation should be performed by qualified electricians or lighting technicians. 3. Before conducing any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool down. 4. Do not touch the fixture while it is in service. 5. If there is any problem with the fixture, DO turn off power, and DO NOT attempt repair unless you are a qualified technician or the customer service member. 1. Junction box Mounting 1. Loosen screws and remove the front lens set carefully from the back plate. 2. Drill appropriate knockouts (B) for wiring, the fixture supports standard 3 1/4' and 4" Junction box. 3. Attach the back plate on the wall use the supplied gaskets for a weather tight seal 4. Finish wiring (Black for Line, White for Neutral and Green/Yellow wire for Ground). 5. Replace the lens on the hinges, make connections and close the lens set then tighten the screws. 2. Conduit Mounting 1. Loosen screws and remove the front lens set carefully from the back plate.(See step 1 above) 2. Remove 1/2 'plug from where you intend to feed conduit 3. Drilling out the holes (C) to secure it on the wall with choosing proper screws. 4. Finish wiring (Black for line, White for neutral and Green/Yellow for ground). (See step 4 above) 5. Replace the lens on the hinges, make connections and close the lens set and tighten the screws to fasten the lens set to the back plate. Save the environment, your children and the planet 500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230 Contact@ledradiant.com – www.ledradiant.com click here to download the PDF file. 5 YEAR WARRANTY POLICY For Commercial LED Lamps and fixtures This document sets forth the warranty policy of the LEDRadiant organization (‘LEDRadiant’) from which you (‘Purchaser’) purchase your commercial LED Lamps . This policy is applicable only to LEDRadiant (‘Products’) described in the Warranty Certificate extended to the Purchaser along with the correlated invoice or the Certificate in the website page for the product being questioned. This warranty policy is subject to the provisions as set forth herein and is subject to the terms and conditions as attached to this document (‘Warranty Terms and Conditions’) . This warranty policy only applies if referred to in a sales agreement between LEDRadiant and the Purchaser and it will replace the standard warranty clause provided in the LEDRadiant general terms and conditions of sale. Warranty period 5 Year. The warranty period starts on the date the products are delivered. By default, purchaser receives above mentioned ‘standard warranty’. On request, an ‘extended warranty’ or ‘customized project warranty’ can be agreed upon after evaluation of the specific application conditions. Extended warranty cost will be calculated and applied to the order. Purchaser shall not rely upon any other information or documentation. Within the warranty period, LEDRadiant will replace any defective bulb or fixture with equal or updated working model in the same conditions or better. Summary Warranty Terms and Conditions (non-exhaustive) • This warranty policy is valid only for products sold in The United States of America. • Products have been purchased directly from a LEDRadiant (sales) organization. • Proof of purchase is available for inspection by LEDRadiant. • Products have been properly installed and operated in accordance with the manufacturer’s instructions. • More than 10% of the LED chips are not properly working. • A LEDRadiant representative will have access to the defective Products. • If the Products or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting systems. • Shipping and Labor costs for installation of the Products are not covered under this warranty. This warranty is valid for order number: By LEDRadiant Save the environment, your children and the planet 500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230 Contact@ledradiant.com – www.ledradiant.com

No
click here to download the PDF file. MEDIUM WALL PACK INSTALLATION GUIDE (WTM-TZP-70600-4Y/5Y) PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION 1. To avoid electric shock, disconnect power at source prior to installation. 2. The installation should be performed by qualified electricians or lighting technicians. 3. Before conducing any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool down. 4. Do not touch the fixture while it is in service. 5. If there is any problem with the fixture, DO turn off power, and DO NOT attempt repair unless you are a qualified technician or the customer service member. 1. Junction box Mounting 1. Loosen screws and remove the front lens set carefully from the back plate. 2. Drill appropriate knockouts (B) for wiring, the fixture supports standard 3 1/4' and 4" Junction box. 3. Attach the back plate on the wall use the supplied gaskets for a weather tight seal 4. Finish wiring (Black for Line, White for Neutral and Green/Yellow wire for Ground). 5. Replace the lens on the hinges, make connections and close the lens set then tighten the screws. 2. Conduit Mounting 1. Loosen screws and remove the front lens set carefully from the back plate.(See step 1 above) 2. Remove 1/2 'plug from where you intend to feed conduit 3. Drilling out the holes (C) to secure it on the wall with choosing proper screws. 4. Finish wiring (Black for line, White for neutral and Green/Yellow for ground). (See step 4 above) 5. Replace the lens on the hinges, make connections and close the lens set and tighten the screws to fasten the lens set to the back plate. Save the environment, your children and the planet 500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230 Contact@ledradiant.com – www.ledradiant.com click here to download the PDF file. 5 YEAR WARRANTY POLICY For Commercial LED Lamps and fixtures This document sets forth the warranty policy of the LEDRadiant organization (‘LEDRadiant’) from which you (‘Purchaser’) purchase your commercial LED Lamps . This policy is applicable only to LEDRadiant (‘Products’) described in the Warranty Certificate extended to the Purchaser along with the correlated invoice or the Certificate in the website page for the product being questioned. This warranty policy is subject to the provisions as set forth herein and is subject to the terms and conditions as attached to this document (‘Warranty Terms and Conditions’) . This warranty policy only applies if referred to in a sales agreement between LEDRadiant and the Purchaser and it will replace the standard warranty clause provided in the LEDRadiant general terms and conditions of sale. Warranty period 5 Year. The warranty period starts on the date the products are delivered. By default, purchaser receives above mentioned ‘standard warranty’. On request, an ‘extended warranty’ or ‘customized project warranty’ can be agreed upon after evaluation of the specific application conditions. Extended warranty cost will be calculated and applied to the order. Purchaser shall not rely upon any other information or documentation. Within the warranty period, LEDRadiant will replace any defective bulb or fixture with equal or updated working model in the same conditions or better. Summary Warranty Terms and Conditions (non-exhaustive) • This warranty policy is valid only for products sold in The United States of America. • Products have been purchased directly from a LEDRadiant (sales) organization. • Proof of purchase is available for inspection by LEDRadiant. • Products have been properly installed and operated in accordance with the manufacturer’s instructions. • More than 10% of the LED chips are not properly working. • A LEDRadiant representative will have access to the defective Products. • If the Products or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting systems. • Shipping and Labor costs for installation of the Products are not covered under this warranty. This warranty is valid for order number: By LEDRadiant Save the environment, your children and the planet 500 North Dixie Hwy, #8, Hollywood, FL 33020 – (844).533.7230 Contact@ledradiant.com – www.ledradiant.com

Shopping Cart - 0 Item

30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

Product Tags

Customer Reviews

Write Your Own Review

You're reviewing: 30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

How do you rate this product? *

Product Tags

Customer Reviews

Write Your Own Review

You're reviewing: 30W LED Wall Pack Fixture: 3000Lm 5500K IP65 UL

How do you rate this product? *

Site Seals

About us

FORMS

Information

Warehouses

CONTACT US

ARE YOU A RESELLER? Click here and fill in the form

Follow Us

Testimonials

Find us on Facebook

Latest Tweets

LOCATION MAP