Customer Reviews

Voila, it works 3-way Review by Marv C

Rate

Because of generally poor seasonal weather conditions, and the Canada Post strike which slowed mail delivery, even for private package delivery companies, I finally received your shipment yesterday, 5 Dec. 2024, via UPS.

I have an old barley twist floor lamp that has a mogul socket for a 3-way bulb. Incandescent lamps for that socket size are increasingly difficult to find, and become very hot in use, so I purchased a 3-way LED bulb with a standard medium base and a socket adapter from a local hardware store. Unfortunately, the lamp's 3-way switch would only give me one light intensity, despite assurances from a store representative that the adapter should work with the 3-way switch. I was disappointed with the the adapter and returned it to the store.

I then did further searching online and found your mogul socket adapter that purported to work with a 3-way switch. I called LEDRadiant and spoke with Eddy (a very pleasant fellow), ultimately ordering your socket adapter. Because of our postal strike here in Canada, the shipping cost was many times the cost of the device, but I was determined to try it.

As soon as I received it yesterday, I screwed it onto my 3-way LED bulb (which I had NOT returned to the store), screwed the combination into my floor lamp, tried the lamp's 3-way switch, and voilà...it worked! The adapter is an elegant simple design with no electronic parts. Essentially, it is a threaded copper double sleeve (doubled back on itself), open at one end. The inner sleeve screws onto the bulb, and the outer part of the sleeve screws into the mogul socket. I am VERY happy with how this simple elegant device solved my problem of changing my floor lamp to LED. This product should be more available in Canada!

(Posted on 11/3/2024)

Excellent Review by Marv C.

Rate

I had an old "Barley Twist" floor lamp with a mogul base for a 3-way incandescent bulb. Because these burn so hot, and I had increasing difficulty finding them, I resolved to switch to a 3-way LED bulb if at all possible. I went to a local hardware store and, on the advice of an employee, bought a mogul adapter for the medium (regular) socket size, being told that the 3-way feature was "in the switch". I bought a 3-way LED bulb at the same time. On returning home, I screwed in the adapter, and then the LED bulb, and tried the switch. I got ONE intensity out of the 3-way LED, so promptly returned the adapter and went back to an online search. Finding LEDRadiant, I phoned, and spoke with "Eddy", a most pleasant fellow, and ordered the adapter in question. Because we currently have a postal strike here in Canada, I spent many times the value of the adapter to have it shipped...but I was DETERMINED! I received the shipment about two weeks later, and decided to try it at once. I screwed the adapter to the bulb, then screwed the combo into the lamp's mogul base, operated the lamp's 3-way switch, and voilà... got the three light intensities from the LED bulb!

It was an elegant solution to the problem. The product contains no electronics. It is simply a double-walled cylindrical copper tube (actually one cylinder that is folded back onto itself, so open at one end, which faces up finally) with mogul threads on the outside and medium (standard) threads on the inside. The open inner end screws up onto the medium bulb, and the closed outer end screws down into the mogul socket. I had to make no alterations in my situation. I was a very happy camper! This product should be available in Canada!

(Posted on 11/3/2024)

It works Review by LM

Rate

A simple gizmo that does what it says it will -- allow a standard 3-way bulb to work properly in a mogul lamp socket. The price is right too except for the extra charge for shipping, but it's still a good option. I will caution anyone thinking of using a 3-way LED bulb to replace an incandescent 3-way mogul bulb to look at the shape of the LED bulb in the context of your lamp. Many LED bulbs flare out just above the screw threads considerably wider than the same spot on the old mogul bulb. If your lamp's opening above the socket is too narrow, those LED bulbs won't screw down far enough to make electrical contact. There are LED bulbs with narrower, longer necks, but you may need to search for them.

(Posted on 10/17/2024)

An excellent value and a product that works. Review by Mitch

Rate

After two purchases that did not work, I located the mogul to standard adapter offered by ledradiant. The online information stated that it would work on 3 way lighting. It arrived earlier than they advertised and it worked! Good product, good company.

(Posted on 6/12/2024)

At last a solution! Review by Lucy's Mom

Rate

I have a special floor lamp my parents got around 1940. I wanted to replace the 3-way bulb with a similar LED bulb. I was shocked when I removed the old one - it was huge and had a base much bigger than a standard bulb. I learned it is a mogul base. I went to the electrical department of the 2 large home supplies stores in my area. One showed me a base adaptor and said it would only work with a 1-way bulb, then suggested I call a handy man to change the wiring. The other insisted their base adaptor would work with a 3-way bulb. It did not. I continued to search the internet and found the Mogul to medium base adapter converter here. I cannot tell you the joy when I attached it to the new standard 3-way bulb, then screwed it into the base and turned the switch. It worked! I didn't even have to raise the flaps on the base. Thank you!

(Posted on 6/6/2024)

Simplicity itself! Review by Brian

Rate

I can backup all the reviews that have been posted, that this device works, and is the best. I can add one thing which may help someone. My antique Mogul 3-way lamp has a large diameter shallow glass shade. For this reason the total length of the bulb or any bulb/adapter combination cannot exceed 6.8 inches or else you will see the bulb poking up above the shade. That is not acceptable. Again, this adapter is best, because it does not add any length to any bulb you use! Sadly, all the NEW LED bulbs Mogul or Standard base are too long, or its design is such that only a small portion of the bulb actually puts light out. My lamp depends on light coming from a more full 'globe' such as a classic bulb. Until the LED technology advances I depend on devices such as this.

(Posted on 1/3/2024)

worked out well Review by someone in pennsylvania

Rate

worked as I had hoped. Now I can use a regular 3-way medium base bulb since I can't find mogul base bulbs anymore.

(Posted on 10/2/2023)

WORKS! Review by Bisquick1

Rate

I think I have a lamp fetish........I have 2 really old Mogul base 3-way switch floor lamps that I wouldn't throw out and I looked online for adaptors that would allow the 3-way switch to operate correctly. Only this one works! I was tired of spending a fortune on Mogul base lightbulbs and this worked like a champ! Thanks!

(Posted on 2/2/2023)

Works for 3-way bulbs! Review by Alex

Rate

After reading Jim's review, I decided to see if this would work with my vintage lamp's 3-way mogul base. It does! I have found no other mass-produced adapter with that functionality. The one downside is that a medium-base bulb with this adapter will sit really deep in a mogul socket,

(Posted on 9/5/2022)

Been needing something like this for a long time! Review by Richard

Rate

We appreciate finding them in your store! You appear to be the sole supplier.
Thank you for the quick shipment!

(Posted on 4/29/2020)

Been needing something like this for a long time! Review by Richard

Rate

We appreciate finding them in your store! You appear to be the sole supplier.
Thank you for the quick shipment!

(Posted on 4/28/2020)

Had to lift the flaps but works Review by Reign

Rate

I ordered some corn bulbs from this same store but didn't ask for mogul base and my fixtures are all mogul. Called and they sent me these adapters at no charge, I only paid the shipping. Easy to convert but it didn't work. I tried the bulb in a regular socket and then realized that the center was not making contact as the regular mogul is longer than the residential, just lifted the flap at the center of the bases with a wood stick and all works perfect.

(Posted on 2/19/2020)

So simple to use, just a couple suggestions Review by Terry S.

Rate

with this adapter, we can replace our old fixtures, so simple to use, screw it tight to the bulb, otherwise when taking of the bulb the adapter may be stuck inside the fixture, also lift up the flap in the fixture because these are shorter than regular mogul.

(Posted on 8/23/2019)

Edison to Mogul Base Adapter Review by Jim

Rate

I had recently purchased a vintage bridge lamp that had a three-way mogul base and it was impossible to find an adapter that would allow me to use an LED three way bulb with an Edison base. This product works. I knew that I has seen one at a store some time back but everyone told me you would just have to use the ugly ceramic single adapter that would only give you access to a single bulb. Glad I found you and if I find anymore vintage lamps with the same problem, "I'll Be Back"(with apologies to Arnold).

(Posted on 6/7/2016)